Mechanical Engineering Problem

Problem Description:

A cold fluid with temperature of 300 K through a large inlet flows into the pipe, and mixes a
warmer fluid at 320 K which penetrates the pipe through a smaller inlet at the elbow. See the picture below.

problem-statement

Figure 1. Problem statement

Solution:

  1. Creating of a Fluid Flow Analysis System in ANSYS
    1. Start ANSYS Workbench;
    2. Create a new fluid flow analysis system;
    3. Rename the project;
    4. Save the project;
  2. Creating the Geometry using ANSYS DesignModeler
    1. Start ANSYS DesignModeler;
    2. Select the units;
    3. Create the geometry, as shown in the Figure 2 below;

elbow

Figure 2. Elbow

2.4. Select the geometry to be a fluid body;
2.5. Close ANSYS DesignModeler.

3. Meshing the Geometry using the ANSYS Meshing Application

3.1. Open the Meshing application in ANSYS;
3.2. Create named selections for the geometry boundaries (see Figure 3 below);

figure-3

Figure 3.

3.3 Create the Mesh as shown in the Figure 4 below;

figure-4

Figure 4.

3.4 Close the Meshing application.

4. Setting Up the CFD Simulation in ANSYS FLUENT

4.1 Start ANSYS SETUP;
4.2 Set up models for the CFD simulation: energy – energy equation; viscous – k-epsilon;
realiable;
4.3 Set up the materials: Fluid – water;
4.4. Set up the cell zone conditions for CFD simulation;
4.5 Set up boundary conditions;
4.6 Set up solution parameters for the CFD simulation;
4.7 Run calculation (see the result on the Figure 5 below).

figure-5

Figure 5.

5. Displaying of Results

5.1. In result section select contours, velocity, symmetry, check ‘Filed’. (see results on the
Figure 6 below);

figure-6

Figure 6.

5.2 Repeat the previous step for the temperature (see results on the Figure 7 below).

figure-7

Figure 7.

6. Close the ANSYS FLUENT application.

Engineering Assignments Help

This is a sample of mechanical engineering problem solved by our academic experts. We remind you that you are not allowed to copy this information, claim it as your own or use it in any other ways that violate the author’s rights.

We know that learning exact sciences can get really hard at times, and we are always ready to help with assignments in a critical situation. Place your order to receive your own mechanical engineering problem solution to study, or read our blog for more sample assignments and useful articles on engineering. We work with any discipline and assignments of various difficulty, from high school to advanced university courses. Apply for “do my homework accounting tasks help,” or assistance with any other discipline 24/7 from us.

One thought on “Mechanical Engineering Problem

Leave a Reply to Glester Cancel reply

Your email address will not be published. Required fields are marked *

Customer testimonials

Submit your instructions to the experts without charge.